PSP Go Micro SD

Was able to get the old port of easily with a hot air station and nearly stuffed out the install as I wasn't using an appropriate soldering tip, but works well and reads the card perfectly.

Only minor issue is that you have to be SUPER careful putting the card in or it will go over the top of the port and end up inside the shell instead :/

I ended up taping a small tab onto the end of the SD card to assist in lining up and guiding in the card. Also makes it easier to remove, though I will now access it through the USB port to avoid removing it again.

You could design and make a 3d print shroud if you are so inclined, but it would border on overengineering for a simple issue.

100% recommended mod if you have the tools and skills to install this.

128GB card is more than enough to enjoy most of the PSP library. I will trial a 64GB card soon and see if that improves the start up time for standby as it is a noticeable delay with the 128GB card.

I bought this product even tho I don't intend to install it because I want to put my money into projects that are valuable. I always thought the previous solution with a ribbon cable and an SD Card adapter was janky and lazy. Your approach is much smarter and along the lines of what I've tried to do myself. However, you need to find a way of getting the spring loaded mechanism to work. That's key because it makes it convenient to switch out SD cards. It's either that or finding a way to support 128GB + cards. Thanks for your efforts!!!!!?

Another amazing device from Natalie the Nerd. This is the best sd mod I’ve seen for the PSP Go. Item arrived delicately packed, as always.